skip to main content


Computer Integrated Machining Plans of Study

2014 – 2015

Computer Integrated Machining Diploma

Basic Machining Certificate

CNC Certificate


2013 – 2014

Computer Integrated Machining Diploma (pdf)

Basic Machining Certificate (pdf)

CNC Certificate(pdf)


2012 – 2013

Computer Integrated Machining Diploma (pdf)

Basic Machining Certificate (pdf)

CNC Certificate (pdf)


Computer Integrated Machining Diploma (D50210) – Printable Version (pdf)
Course Name and Number Class Hours Lab Hours Credit Hours
FALL SEMESTER, 2014
ACA 122 College Transfer Success 1 0 1
CIS 110 Introduction to Computers 2 2 3
DFT 119 Basic CAD 1 2 2
MAC 121 Introduction to CNC 2 0 2
MAC 131 Blueprint Reading MACH I 1 2 2
MAC 141 Machining Applications 2 6 4
SPRING SEMESTER, 2015
MAC 122 CNC Turning 1 3 2
MAC 124 CNC Milling 1 3 2
MAC 142 Machining Applications II 2 6 4
MAC 132 Blueprint Reading Machinist II 1 2 2
MAC 151 Machining Calculations 1 2 2
MAC 248 Production Procedures 0 3 2
OR
MAC 226 CNC EDM Machining 1 3 2
SUMMER TERM, 2015
ENG 111 Writing and Inquiry* 3 0 3
MAC 222 Advanced CNC Turning 1 3 2
MAC 224 Advanced CNC Milling 1 3 2
FALL SEMESTER, 2015
WBL 110 World of Work 1 0 1
WBL 111 Work-Based Learning I 0 10 1
PHY 110Conceptual Physics 3 0 3
PHY 110AConceptual Physics Lab 0 2 1
Total Semester Hours Required for Diploma 41

V.A. Students: An approval signature from the V.A. Office is required before registering. Some courses may not be certifiable.

*ENG 070, ENG 080, ENG 090, ENG 090A and RED 070, RED 080, RED 090 or DRE 096, 097, 098; MAT 050, MAT 060 or DMA 010, DMA 020, DMA 030 may be required based on placement test results.

The above plan of study is the standard curriculum for the above program. Any deviation from the prescribed curriculum must have approval in advance. All prerequisite course requirements must also be met. To graduate the student must successfully complete all the required courses, the required credit hours for electives, and have at least a 2.0 grade point average. This plan of study is subject to change when the college thinks such action is in the best interest of the student or the program. It is the responsibility of the student to meet requirements for graduation. If accepted students do not enroll for three successive semesters, they must contact the Admissions office to determine if readmission is necessary.

Basic Machining Certificate (C50210M) – Printable Version (pdf)
Course Name and Number Class Hours Lab Hours Credit Hours
DFT 119 Basic CAD 1 2 2
MAC 121 Introduction to CNC 2 0 2
MAC 131 Blueprint Reading MACH I 1 2 2
MAC 141 Machining Applications 2 6 4
CIS 110 Introduction to Computers 2 2 3
Total Semester Hours Required for Certificate 13

V.A. Students: An approval signature from the V.A. Office is required before registering. Some courses may not be certifiable.

CNC Certificate (C50210C) – Printable Version (pdf)
Course Name and Number Class Hours Lab Hours Credit Hours
MAC 121 Introduction to CNC 2 0 2
MAC 122 CNC Turning 1 3 2
MAC 124 CNC Milling 1 3 2
MAC 131 Blueprint Reading MACH I 1 2 2
MAC 151 Machining Calculations 1 2 2
MAC 222 Advanced CNC Turning 1 3 2
MAC 224 Advanced CNC Milling 1 3 2
Total Semester Hours Required for Certificate 14

V.A. Students: An approval signature from the V.A. Office is required before registering. Some courses may not be certifiable.

*MAT 060 or DMA 010, 020, 030 may be required based on placement tests.